ROLLER WELDING · TH-160×2200
Automatic Double Pipe Welding Machine
A double-end automatic welding machine for conveyor roller production, designed to weld both ends simultaneously and improve batch-production efficiency.
KEY CAPABILITIES
Simultaneous Welding at Both Roller Ends
φ76–159 mm
Specified workpiece diameter range.
200–2200 mm
Specified weldable workpiece length.
60–250 A
Specified welding-current range.
MACHINE FEATURES
Automated Welding for Roller Assembly
- Both roller ends are welded simultaneously
- Automatic clamping and automatic welding cycle
- Compatible with CO₂, Ar + CO₂, or Ar + CO₂ + O₂ shielding gas
- Flux-cored wire with CO₂ can be used for higher weld strength
- PLC-based control system
- Designed to improve reliability, working range and production efficiency
Double-End Process
The machine automatically clamps the workpiece and performs welding at both ends at the same time. This arrangement reduces manual handling and supports consistent batch production.
Welding rotation speed is adjustable from 0 to 10 rpm according to the stated machine parameters.
TECHNICAL SPECIFICATIONS
TH-160×2200 Standard Parameters
| Model | TH-160×2200 |
| Machine center height | 850 mm |
| Welding workpiece length | 200–2200 mm |
| Welding workpiece diameter | φ76–159 mm |
| Welding current | 60–250 A |
| No-load voltage | 45–55 V |
| Rated capacity | 50 kVA |
| Shielding-gas flow | 10–25 L/min |
| Weldable workpiece length | 200–2200 mm |
| Welding rotation speed | 0–10 rpm |
| Overall dimensions | 3800 × 500 × 1150 mm |
| Weight | 1500 kg |
Specifications are based on the supplied equipment document and may be confirmed against the final machine configuration.
Discuss Your Roller Welding Requirements
Send us your roller diameter, length, welding process, shielding gas and target capacity for configuration advice.