ROLLER TUBE END MACHINING · TC-160×2200
Automatic Double-End Boring Machine
A dedicated double-end boring machine for machining conveyor roller tubes, designed to process both ends simultaneously for consistent and efficient production.
KEY CAPABILITIES
Machine Both Roller Tube Ends in One Cycle
φ76–159 mm
Specified steel tube outside-diameter range.
200–2200 mm
Specified steel tube length range.
0–70 mm
Machining depth at both tube ends.
MACHINE FEATURES
Dedicated to Roller Tube End Machining
- Both tube ends are machined simultaneously
- Mechanical centering and clamping mechanism
- Hydraulic stepless feed-speed adjustment
- Independent manual adjustment for the two cutting carriages
- Automatic tool withdrawal helps protect machined surfaces
- PLC-based electrical control system
- Designed for batch production of roller tubes
Process Control
The cutting carriages use hydraulic drive with stepless speed adjustment. The machine processes both ends at the same time, while the tool positions can be set independently to suit the required machining depth.
A hydraulic automatic tool-withdrawal mechanism retracts the cutter when the carriage reaches its preset position.
TECHNICAL SPECIFICATIONS
TC-160×2200 Standard Parameters
| Model | TC-160×2200 |
| Spindle center height | 900 mm |
| Steel tube outside diameter | φ76–159 mm (Customizable to customer requirements) |
| Steel tube length | 200–2200 mm (Customizable to customer requirements) |
| Machining depth at both ends | 0–70 mm (Customizable to customer requirements) |
| Slide travel speed | 2 m/min |
| Spindle speed | 500 r/min (Customizable to customer requirements) |
| Feed speed | Hydraulic stepless adjustment |
| Cutting depth | 0–3 mm |
| Tool-post radial feed scale | 0.05 mm per division |
| Radial tool-relief repeat positioning accuracy | 0.05 mm |
| Main drive motor | 4 kW, 1450 r/min (Customizable to customer requirements) |
| Workpiece clamping motor | 1.5 kW, 1450 r/min |
| Hydraulic system working pressure | 2.5–4 MPa |
| Flow rate | 0–25 L/min |
| Overall dimensions | 4500 × 1120 × 1200 mm |
| Weight | 2100 kg |
Specifications are based on the supplied equipment document and may be confirmed against the final machine configuration.
Discuss Your Roller Tube Machining Requirements
Send us your tube diameter, length, end-machining depth and target capacity for configuration advice.