Automatic Double-End Shaft Drilling Machine
Automatic equipment for drilling pin holes at both ends of conveyor roller shafts. Dual spindles, pneumatic clamping and PLC control provide efficient, repeatable machining for batch production.
Simultaneous Pin-Hole Drilling at Both Shaft Ends
The Z14 is designed specifically for machining pin holes in conveyor roller shafts. Both ends are drilled in one automated cycle to reduce auxiliary time and improve batch-production efficiency.
Dual 1.5 kW Spindles
Independent spindle motors process both shaft ends simultaneously for fast and consistent drilling.
Pneumatic Clamping
The pneumatic system provides quick clamping and supports rapid tool approach and return.
PLC-Controlled Cycle
Programmable control and non-contact position switches support stable, repeatable automatic operation.
Designed for Roller Shaft Pin Holes
The machine handles shaft diameters from 20 to 40 mm, hole diameters from 6 to 14 mm and workpiece lengths from 200 to 650 mm.
Variable-frequency spindle speed enables adjustment for different shaft and hole specifications.
Efficient Batch Processing
- Both shaft ends drilled in the same cycle.
- Rapid approach and return reduce non-cutting time.
- Automatic sequence lowers manual workload.
- Stable controls support consistent production.
Main Specifications
| Model | Z14 |
|---|---|
| Shaft diameter | Ø20–Ø40 mm |
| Hole diameter | Ø6–Ø14 mm |
| Processing length | 200–650 mm |
| Spindle speed | Variable-frequency control |
| Clamping method | Pneumatic |
| Clamping pressure | 6–7 MPa |
| Spindle motors | 2 × 1.5 kW |
Standard Electrical Configuration
| PLC | Taiwan brand |
|---|---|
| AC contactor | Delixi |
| Miniature relay | CHINT |
| Proximity switch | Shanghai brand |
| Control buttons | Delixi |
Specifications and component brands may be adjusted according to the final machine configuration. Please confirm shaft dimensions, hole requirements and target output before ordering.
Need a Double-End Drilling Solution?
Send us your shaft drawing, diameter, length and hole size. JM Roller will recommend a suitable configuration.